Product ID:ROYAL 4002, HPC 4002/2
MSDS Date:03/03/1987
FSC:9150
NIIN:00N031639
MSDS Number: BPLMF

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 201-887-7410

Cage: 07950

Telephone: 973-887-7411/7410

Cage: 07950

HPC 4002/2

CAS: 68424-31-7

Fraction By Weight: >99%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NOT RELEVANT
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:IMMED FLUSH W/PLENTY OF COOL WATER FOR AT LEAST 15
MINUTES. DO NOT LET VICTIM RUB EYES. SKIN:WASH AFFECTED AREA. WASH
CONTAMINATED CLOTHING BEFORE REUSE. INHAL:NO APPLICABLE INFO FOUND.
INGEST:CAL L MD OR POISON CONTROL CENTER PROMPTLY.

Flash Point Method:COC
Flash Point:509F,265C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. USE H2O TO KEEP FIRE-EXPOSED CNTNRS COOL. IF SPILL/LEAK HAS NOT
IGNITED, USE H2O SPRAY TO (SUPP DATA)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WEAR APPROP NIOSH/MSHA APPRVD RESP PROT & PROT
CLTHG AS DESCRIBED. CONTAIN SPILLED MATL. TRANSFER TO SECURE
CNTNRS. WHERE NEC, COLLECT USING ABSORB MEDIA. IN EVENT OF
UNCONTROLLED RELS OF MATL, USER S HLD DETERM IF RELS IS REPORTABLE
UNDER (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WHERE EXPOSURE IS LIKELY TO EXCEED ACCEPTABLE
CRITERIA, USE NIOSH/MSHA APPROVED RESPIRATORY EQUIPMENT.
RESPIRATORS SHOULD BE SELECTED BASED ON FORM & CONCENTRATION OF
CONTAMINANT IN AIR & I/A/W OSHA ( 29 CFR 1910.134).
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROT CLTHG WHICH IS IMPERVIOUS TO PROD
FOR DURATION OF ANTIC EXPOS IF THERE IS POTNTL FOR PRLNG/RPTD SKIN
CONT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:DISPERSE VAPS. H2O SPRAY MAY BE USED TO FLUSH SPILL
AWAY FROM FIRE & TO DILUTE SPILLS TO NON-FLAMM MIXTS. SPILL
PROC:APPLIC LAWS & REGS. AVOID UNCONTROLLED RELS OF MATL. WHERE
SPILLS A RE POSS, A COMPREHENSIVE SPILL RESPONSEPLAN SHLD BE
DEVELOPED & IMPLEMENTED.

HCC:V6
Vapor Density:>1
Spec Gravity:1.005 (H2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID, MILD ESTER ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID HEATING TO DECOMPOSITION. USER IS
ADVISED TO HAVE SAFETY EXPERT EVALUATE SPECIFIC CONDITIONS OF USE.
Hazardous Decomposition Products:DECOMPOSITION OF ORGANIC MATERIALS MAY
PRODUCE CO & CO2.

Waste Disposal Methods:ALL RECOVERED MATL SHLD BE PACKAGED, LABELED,
TRANSPORTED & DISP/RECLAIMED IN COMPLIANCE W/APPLIC FED, STATE &
LOC LAWS & REGS & IN CONFORMANCE W/GOOD ENGINEERING PRACTS. AVOID
LANDFILLING OF LIQS. RE CLAIM WHERE POSSIBLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.